From Offensive-security.com

Revision as of 02:43, 22 June 2007 (edit) 24.85.198.102 (Talk) (→Apple) ← Previous diff		Revision as of 10:53, 22 June 2007 (edit) (undo) 169.134.226.164 (Talk) Next diff →
Line 44:		Line 44:
	* Boots fine into KDE/flux with no configuration needed		* Boots fine into KDE/flux with no configuration needed
	* Sound does not work correctly (distorting etc..)		* Sound does not work correctly (distorting etc..)
-	* Detects onboard ethernet & broadcom wireless devices	+	* Detects onboard ethernet
-		+
-	====Aspire 1350 ====	+
-	* Works fine without extra parameters	+
-		+
-	====Aspire 1355====	+
-	* Works fine without extra parameters	+
-		+
-	====Aspire 1520 ====	+
-	* Needs the "irqpoll" kernel option at the boot to support cardbus cards (tested with D-Link DWL-G650 rev. C3).	+
-	E.g. "bt irqpoll"	+
-	* No built-in wireless card, so WiFi compatibility depends on the PCMCIA or USB device you use.	+
-		+
-	====Aspire 3102WLMi====	+
-	* Hangs on bootup, loading ALSA drivers "ALSA sound/pci/hda/hda_codec.c: 204: hda_codec: invalid dep_range_vol 0:7fff"	+
-	''(Note: You can get it to boot up by using 'bt debug' at the boot prompt!)''	+
-		+
-	==== Aspire 3680, 3690 + Aspire 5512 wlmi ====	+
-	* Runs fine with no extra parameters.	+
-	* detect wireless	+
-	* just the screen doesn't the right widescreen resolusion but still usable (Aspire 5512 wlmi tested ati.lzm but still nothing)	+
-		+
-	==== Aspire 1692 WLMi ====	+
-		+
-	* Runs fine with no extra parameters.	+
-	* detect IPW2200	+
-	* Packet Injection with IPW2200 is possible!	+
-	* just the screen doesn't the right widescreen resolusion but still usable (Aspire 5512 wlmi tested ati.lzm but still nothing)	+
-		+
-	==== Aspire 1682WLMi ====	+
-		+
-	* Runs fine without extra parameters.	+
-		+
-	==== Aspire 5051AWXMi ====	+
-		+
-	* Hangs on bootup, loading ALSA drivers "ALSA sound/pci/hda/hda_codec.c: 204: hda_codec: invalid dep_range_vol 0:7fff".	+
-	''(Note: Will test leaving as per 5101AWLMi and boot options 'bt debug' as per 3102WLMi)''	+
-		+
-		+
-	Tried on 5051AWXMi today, hung on the above 5-10mins later booted to prompt.	+
-		+
-	==== Aspire 5100 ====	+
-	*Also hangs on bootup, wait for a few minutes. You will see the hda_codec.c error for a while (6 minutes on this one), and then it boots up fine.	+
-	*Built in atheros 5005g wireless card works flawlessly for injection/sniffing and every other task I've tried.	+
-	*Note: The currently used Aspire 5100 has a AR5007EG Atheros card, NOT a 5005g. BackTrack does not automatically detect the card.	+
-	*If you do a HDD install, you can remove the hda_codec.c (from another OS, I did it from ubuntu), it still hangs a tad on bootup, but about 1/10 of the time (Make sure you remove the right file, and by remove, I mean copy it to another location, then delete the original)	+
-		+
-	==== Aspire 5101AWLMi ====	+
-		+
-	* Hangs on bootup, loading ALSA drivers "ALSA sound/pci/hda/hda_codec.c: 204: hda_codec: invalid dep_range_vol 0:7fff", but just keep it running for like 10 minutes and it will start just fine.	+
-		+
-	====Aspire 5102WLMi====	+
-	Not Runs from boot but das work under Pc virtualisation programs like Microsoft Virtual PC 2007 Or VMware Workstation	+
-	P.S. Not probed All Capabilites of Bt2 Just instal but all locks fine for now	+
-		+
-	NOT WORK WIRLESS CARD AR5005G Atheros card	+
-		+
-	==== Toshiba Tecra ====	+
-	* Does not detect mouse drivers.	+
-		+
-	== Alienware ==	+
-	====Area 51m====	+
-	* Runs fine with no extra parameters.	+
-		+
-	== Apple ==	+
-		+
-		+
-		+
-	====MacBook Pro Core 2 Duo (2006, ATI Mobility Radeon X1600)====	+
-	* [[HCL:Laptops:MBPlspci | lspci output ]]	+
-		+
-	* Mostly everything works very well	+
-	* Boots up reasonably fast	+
-	* Highest screen resolution is 1024x768 @ 85Hz, unless you install the ATI drivers and reboot the X Server.	+
-	* No sound output through built-in speakers. However it can be heard via headphones or external speakers.	+
-	* Not all MacBook Pro Core Duo's will let you switch between virtual desktops (i.e. alt-f1/alt-f2/ctrl-alt-f1)	+
-	* Internal wireless doesn't function out of the box.	+
-		+
-	====MacBook Pro Core 2 Duo (2007 Santa Rosa, nVidia Geforce 8600M GT)====	+
-	* Boots properly and fast, works well.	+
-	* Internal ethernet not working.	+
-	* Internal wireless not working, use USB dongle.	+
-	* Bluetooth not working.	+
-	* Max resolution is 1024x768 @ 85Hz (compared to the native 1440x900) due to outdated Nvidia drivers. Installation of new Nvidia closed-source drivers has not yet been successfully performed.	+
-		+
-	====MacBook Core Duo====	+
-	*Not working	+
-	*Keypad typing double at login	+
-		+
-	====MacBook Core 2 Duo====	+
-	* [[HCL:Laptops:MBPC2Dlspci | MacBook Pro Core 2 Duo lspci output ]]	+
-	* Not working correctly: trackpad and keyboard. keyboard works in BT2 beta, but not in final	+
-	* Not working: WiFi (no drivers)	+
-		+
-	== Asus ==	+
-		+
-	====A2500H====	+
-	* Runs fine with no extra parameters.	+
-		+
-	====A6Km Q012H====	+
-	* Runs fine with no extra parameters.	+
-	* Internal Broadcom bcm4318 runs OK.	+
-		+
-	====A6JA====	+
-	* Runs fine with no extra parameters.	+
-		+
-	====A6T AP008B====	+
-	* Runs fine with no extra parameters.	+
-	* Do not run xconf. KDE is unabled to start afterwards.	+
-		+
-	====A6Va B028H====	+
-	* Runs fine with no extra parameters.	+
-		+
-	====L3000D====	+
-	* Runs fine with no extra parameters.	+
-		+
-	====A8JS====	+
-	* Runs fine with no extra parameters.	+
-	* Do not run xconf. KDE is unabled to start afterwards.	+
-		+
-	====A6Rp ====	+
-	* Runs fine with bt acpi=off parametr.	+
-		+
-	====L3S/L3800 with a Netgear WGT511 PCMCIA Wireless card====	+
-	* Runs fine	+
-	* run xconf then ati to get a nice KDE at 1400x1050 !	+
-		+
-	====A6Vc====	+
-	* Runs fine with no extra parameters.	+
-	* Sound doesn't work with the CD (Realtek HD).	+
-	* No problem to instal on HD (and with the sound)	+
-		+
-	== [http://en.wikipedia.org/wiki/Averatec Averatec] ==	+
-	===AV3715-EH1===	+
-	* [[HCL:Laptops:AV3715EH1lspci | lspci output ]]	+
-	* Runs fine with no extra parameters.	+
-	* Ethernet, WiFi, Video, Audio, FireWire, USB all auto-detected successfully.	+
-	* Track pad not detected. USB Mouse auto-detected successfully.	+
-	* Both KDE and flux will not start properly if you run xconf.	+
-		+
-		+
-	===AV1020-ED1===	+
-	* Trackpad, Ethernet, Ralink2500, Audio, and USB are auto-detected correctly	+
-	* Only thing that isn't auto detected is the screen resolution. To fix:	+
-	- Edit /etc/X11/xorg.conf	+
-	- Change VESA driver to i810, and add 1280x768 to the front of the resolution list	+
-		+
-	== Dell ==	+
-	===Inspiron===	+
-		+
-	====Inspiron 1000====	+
-	* Runs fine with no extra parameters.	+
-		+
-	====Inspiron 1150====	+
-	*Runs fairly well, needs to detect graphics before launching GUI	+
-		+
-	I have found that just removing the X11 config file allows my 1150 to get past the "IO error 104". Just run: rm -f /etc/X11/xorg.conf	+
-		+
-	====Inspiron 1501====	+
-	* Runs fine with no extra parameters.	+
-		+
-	====Inspiron 510m====	+
-	*Runs fairly well, needs to detect graphics before launching GUI	+
-	--> Needs command before launching GUI: xconf	+
-		+
-	====Inspiron E1505 / 6400====	+
-	* Runs fine with no extra parameters.	+
-	* Dell 1350 works, not sure about injection	+
-		+
-	====Inspiron E1705 / 9400====	+
-	* Runs fine with "slax nopcmcia" command appended due to lack of PCMCIA slot on machine	+
-	* Core 2 Duo works like a charm	+
-	* Needs NISWrapper for Broadcom BCMWL5.INF	+
-		+
-	====Inspiron 1300====	+
-	*Needs command: "bt acpi=off" - otherwise, gets a blackscreen.	+
-		+
-	====Inspiron 2200====	+
-	* Seems to run fine	+
-	* Some problems with wifi	+
-		+
-	====Inspiron 4100====	+
-	* Seems to run fine	+
-	* Even the wifi networking was working	+
-	* Does not support the 1600x1200 display in the NV G2Go	+
-		+
-	====Inspiron 6000====	+
-	* Runs fine with no extra parameters.	+
-	* no matching wifi drivers? wifi fine from pcmica. ?? Wifi works for me	+
-	* X runs at 1024x768 by default, get the ATI drivers to fix	+
-	* Intel Graphics works with 1280x800	+
-		+
-	====Inspiron 8200====	+
-	* Runs fine with no extra parameters.	+
-		+
-	====Inspiron 9100====	+
-	* Runs fine with no extra parameters.	+
-		+
-	====Inspiron 9200====	+
-	* Runs fine with no extra parameters.	+
-		+
-	====Inspiron XPS Gen 2====	+
-	* Works perfectly with this laptop.	+
-	* No extra parameters needed.	+
-		+
-	====XPS M1210====	+
-	* Works perfectly with ipw3945 drivers	+
-	* Download video drivers from Nvidia for 1280x800	+
-		+
-	====XPS M140====	+
-	* Works with "bt acpi=off", otherwise screen goes black on loading kernel	+
-		+
-	====Inspiron 6400====	+
-	Works good with ipw3945 drivers	+
-	I load BT from USB flash drive and all is O.K.	+
-		+
-	====Inspiron 630m====	+
-	* Needs command: "bt acpi=off" - otherwise, gets a blackscreen	+
-		+
-	===Latitude===	+
-	====Latitude CPx1====	+
-	* Hangs on loading USB (did work with previous beta versions though)	+
-		+
-	====Latitude D420====	+
-	* Works perfectly with ipw3945 drivers	+
-	====Latitude D505====	+
-	Should make use of the "A09" BIOS rev. while running a LINUX environment. Although there acutally are other (newly updated) versions alike the "A11" BIOS. Other BIOS versions rather than "A09", that is available at DELL:s homepage for download, seems to be incompatible with the X server-driver further known as "I810".	+
-		+
-		+
-	====Latitude D520====	+
-	* Works perfectly with ipw3945 drivers	+
-	* Runs on Centrino Duo with no extra parameters.	+
-		+
-	====Latitude D600====	+
-	*Doesn't run fine, tested with 2 D600 --> startx fails	+
-	---------------------	+
-	BT2 final: startx works fine on my D600	+
-		+
-	Work Fine on my Latitude D600 BT2 final boot on USB	+
-	---------------------	+
-	*D600 Rev.A04: Everything works without modification (including startx, wireless, ethernet).	+
-	*Try running xconf before startx and it works beautifully. --got that tip form the login page, also in /etc/issue ;)	+
-		+
-	====Latitude D610====	+
-	*Runs fine with no extra parameters.	+
-	*Runs fine installed on the hard drive without any extra parameters.	+
-		+
-	====Latitude D620====	+
-	*Runs fine with no extra parameters.	+
-	*Intel 945GM chipset needs the new xserver-xorg-video-intel driver to run Xorg at higher resolutions.	+
-		+
-	====Latitude D810====	+
-	*Runs fine with no extra parameters.	+
-		+
-	====Latitude D820====	+
-	*Runs fine with no extra parameters.	+
-	*Runs on CORE2 with no extra parameters.	+
-	* [[HCL:Laptops:dell_d820lspci | lspci output ]]	+
-	*for the version with the nvidia card and wuxga screen, the nvidia binary driver is necessary to get a proper resolution in X	+
-		+
-	====Latitude L400====	+
-	*Doesn't run fine with BIOS A09. ACPI doesn't work. Fan doesn't start and laptop overheats. Runs fine with APM using acpi=off.	+
-	*ACPI runs fine with BIOS A03. Suspend works using acpi_sleep=s5_bios.	+
-	*Freezes during boot on "Starting Usb..."	+
-		+
-	====Latitude X1====	+
-	*Runs fine with no extra parameters.	+
-	Needs 915resolution to get 1280x768	+
-		+
-	====Latitude C640====	+
-	*Runs fine with no extra parameters.	+
-	*Ralf Falco Leyva,Germany	+
-		+
-	====Latitude C610====	+
-	*CD Boot freezes when it reaches "Starting USB support"	+
-	*BT2 works flawlessly (so far) on board ETH0 drivers loaded at boot time.	+
-	*Sound and gfx perfect.	+
-	*USB Bluetooth dongle or memory stick found at boot up.	+
-		+
-	====Latitude 120L====	+
-	*Runs fine with bt acpi=off from livecd.	+
-		+
-	====Latitude 110L====	+
-	*Ran fine with livecd - installing to HD was nightmare, but got done and works.	+
-		+
-	====Precision M65====	+
-	* WIFI works with ipw3945 drivers	+
-	* Xorg looks better with nvidia drivers (1920x1200)	+
-		+
-	==ECS==	+
-	====Model GREEN220====	+
-	*runs fine with live CD at 1280x800 using "xconf"	+
-		+
-	== Everex ==	+
-	==== Stepnote SA ====	+
-	*Doesn't finish booting, freezes with this error: sdhci:slot0: unknown controller version (16)	+
-	*If anybody has a solution for this... Please post...	+
-		+
-	philips freevents x55	+
-	i have same error message on core2duo based philips freevents laptop. does any one know the solution....	+
-		+
-	== Fujitsu Siemens ==	+
-	====Lifebook C-1110====	+
-	* Runs fine with no extra parameters	+
-	* Intel IPW2200 has to be enabled with "ifconfig eth1 up"	+
-	* kismet and airodump are working fine	+
-	* X runs in 1024x768 at 85 Hz	+
-		+
-	====Lifebook E-6560====	+
-	* Runs fine with no extra parameters. X is also nice.	+
-		+
-	====Amilo Xi1526====	+
-	* Runs without any problems...	+
-	* WiFi needs ipw3945 module	+
-	* X runs in 1024x768 / needs NVIDIA driver for 1440x900	+
-		+
-	== Gateway ==	+
-	==== CX210S====	+
-	* Runs fine with no extra parameters.	+
-	* Uses IPW3945 wireless drivers.	+
-		+
-	===M275===	+
-	*Runs fine with no extra parameters.	+
-	*Touchscreen not yet verified.	+
-		+
-	==== MX6025====	+
-	* Fine with no extra parameters	+
-	* Built-in MiniPCI Wifi card is a Broadcom/Gemtek WMIB-160GW.	+
-		+
-	==== MX6625====	+
-	* Use bt acpi=off at the boot prompt	+
-	* To get card services working also add: irqpoll pnpbios=off pci=usepirqmask pci=biosirq	+
-		+
-	==== MX6920====	+
-	* Fine with no extra parameters	+
-		+
-	==== MX6927====	+
-	* use "bt irqpoll", otherwise boot stops at "looking for data directory"	+
-		+
-	==== MX6428====	+
-	* Fine with no extra perameters	+
-	* Built-in wifi is broadcom **CAUTION** use external	+
-		+
-	==== 7422GX====	+
-	*Fine with no extra parameters	+
-	*Built-in Wi-Fi is Broadcom. Works fine.	+
-		+
-	== Gericom ==	+
-	==== 1st Supersonic ====	+
-	* Runs fine without extra parameters.	+
-	* PCMCIA 22MBit Wireless Card with TI-Chipset requires to load the acx Module but works fine.	+
-		+
-	== HP/Compaq ==	+
-	====Armada 1750====	+
-	* Runs fine with no extra parameters.	+
-		+
-	Runs fine, but, sound device didnt get recongnised.:(	+
-		+
-	====Armada 6500====	+
-	** erm eth0 up =chash ..56kmodem/10/100net combo .	+
-		+
-	====Armada E500====	+
-	*Runs fine with no extra parameters.	+
-		+
-	====Armada M700====	+
-	* Probs with Kernel Panic.Will work on it:-).	+
-	ralf.falco@online.de	+
-		+
-	====Evo N410c====	+
-	* Runs fine with no extra parameters.	+
-		+
-	Confirmed working AOK no boot time parameters needed. Note: I don't own the docking station for this laptop so I don't have CD or Floppy. But BT2 booted and installed to HD fine from usb flash drive.	+
-		+
-	====Evo N600c====	+
-	* Runs fine with no extra parameters.	+
-		+
-	====Evo N610c====	+
-	* Runs fine with no extra parameters.	+
-		+
-	====Evo N620c====	+
-	* Runs fine with no extra parameters.	+
-		+
-	====nc6000====	+
-	* Runs fine with no extra parameters.	+
-		+
-	====nc6120====	+
-	* Runs fine with no extra parameters.	+
-	* [[HCL:Laptops:nc6120lspci | lspci output ]]	+
-		+
-	====nc6220====	+
-	* Runs fine with no extra parameters.	+
-		+
-	====nc6230====	+
-	* Not tested, yet.	+
-		+
-	====nc8430====	+
-	* Runs fine with no extra parameters. (Internal-NIC and ipw3945)	+
-	* Test with Netgear WG511T comming later...	+
-		+
-	====nx6110====	+
-	* Runs fine with no extra parameters.	+
-	* [[HCL:Laptops:nx6110/lspci|lspci output]]	+
-		+
-	====nx6310====	+
-	* Runs fine with no extra parameters.	+
-	* iwp3945 module has to be loaded	+
-	[http://backtrack.offensive-security.com/index.php?title=HCL:Wireless#IPW3945 ipw3945 wireless]	+
-	* integrated bluetooth turn has to be turned on by hciconfig hci0 up	+
-		+
-	wireless and bluetooth must be turned on before booting backtrack	+
-		+
-	and also the dual core probably needs to recompile the kernel to use both cpus	+
-		+
-	====nx6325====	+
-	* Runs fine with no extra parameters.	+
-	* Optional Video: ATI Drivers from ATI Website (You'll have to recompile the kernel without the radeon-driver before installing the proprietary driver)	+
-		+
-	====nx7400====	+
-	* Runs fine with no extra parameters.	+
-	* Runs on Centrino Duo with no extra parameters.	+
-	* Wireless is NOT supported out-of-the-box	+
-	* Freezes when trying to use ipw3945 drivers	+
-		+
-	====nx9020====	+
-	* Runs fine with no extra parameters.	+
-		+
-	====nw9440====	+
-	* boots fine including enhanced SATA	+
-	* only one CPU seen on Core 2 Duo T7200 and runs at 100% usage (klaptop cpu throttle??)	+
-	* 17" widescreen, 1920x1200 via download/install of nvidia drivers from src	+
-	* [http://backtrack.offensive-security.com/index.php?title=HCL:Wireless#IPW3945 ipw3945 wireless]	+
-		+
-	===Pavilion dv5215us===	+
-	* Runs fine with no extra parameters.	+
-		+
-	===Pavilion dv1664ea===	+
-	* Does not detect the onboard ethernet/ or Wireless Card	+
-	* Other wise runs smooth	+
-		+
-	===Pavilion dv2098ea===	+
-	* Does not detect the onboard ethernet/ or Wireless Card	+
-	* Other wise runs smooth	+
-		+
-	====Pavilion DV6000====	+
-	* Runs fine with no extra parameters.	+
-	* Video Intel Corporation Mobile 945GM/GMS/940GML	+
-	* [[HCL:Laptops:dv6000lspci | lspci output ]]	+
-	* Video Nvidia Go6150 Works Perfect	+
-		+
-	====Pavilion DV6152====	+
-		+
-	*Boots and runs fine	+
-	*Lack of Bluetooth adapter support	+
-	*Video Nvidia Go7200 Works fine	+
-		+
-	====Pavillion DV6226====	+
-		+
-	* Needs command: "bt acpi=off" - otherwise, gets a blackscreen	+
-		+
-	====Pavillion ZE4935====	+
-		+
-	* Installs rough. Used a manual install manual, other than that works just fine, WiFi driver problems	+
-		+
-	====HP Pavilion ZV6170us/ca====	+
-	* Runs fine with no extra parameters	+
-	* run xconf to get 1280x800 resolution ... working on installing ati drivers	+
-	* [[HCL:Laptops:zv6170lspci | lspci output]]	+
-		+
-	====HP Pavilion ZV6195====	+
-	*Seems to require : acpi=off	+
-		+
-	====HP Pavilion dv8218ea====	+
-	*all works fine from CD, but if you do xconf=640resolution, if not=1024 with a 85refresh rate.	+
-		+
-	====Presario R4000====	+
-	* Runs fine, but may need to add the acpi=off option.	+
-		+
-	====Presario 1400====	+
-	* Runs fine with no extra parameters.	+
-		+
-	====Presario 2100====	+
-	* Runs fine with no extra parameters.	+
-		+
-	====Presario V2405====	+
-	*Runs fine with no extra parameters	+
-	*run xconf to get better resolution	+
-	*Default Wireless card Broadcom B/G does not work however	+
-		+
-	====Presario V4000====	+
-	*Does not detect widescreen resolution (1280x768, 1280x800 or 1400x1050) and stretches pixels, otherwise Runs fine.	+
-		+
-	====Omnibook 6100====	+
-	* Runs fine with no extra parameters.	+
-		+
-	== IBM ==	+
-	====R30====	+
-	*Runs with "bt irqpoll"	+
-		+
-	====R31====	+
-	*Runs with "bt irqpoll"	+
-		+
-	====T22====	+
-	* Runs fine with no extra parameters.	+
-	* Do not run Xconfig or display looks bad.	+
-		+
-	====T23====	+
-	* Runs fine with no extra parameters.	+
-	* [[HCL:Laptops:T23lspci | lspci output ]]	+
-		+
-	====T43====	+
-	* Runs perfectly with no changes	+
-	====R50e====	+
-	* Runs perfectly with no changes	+
-		+
-	== IBM ==	+
-	====Thinkpad 600====	+
-	* Runs fine with no extra parameters.	+
-		+
-	====T30====	+
-	* Runs fine with no extra parameters	+
-	* Idealy modprobe ibm_acpi and modprobe speedstep_ich	+
-		+
-	====T40====	+
-	* Runs fine with no extra parameters.	+
-		+
-	====T41====	+
-	* Video : radeon drivers via xconf	+
-	* [[HCL:Laptops:T41lspci | lspci output ]]	+
-		+
-	====T42====	+
-	* Runs fine with no extra parameters.	+
-		+
-	====T43====	+
-	* Runs fine with no extra parameters.	+
-	* [[HCL:Laptops:T43lspci | lspci output ]]	+
-		+
-	====T60====	+
-	* Video: ATI Drivers from ATI Website	+
-	* [[HCL:Laptops:T60lspci | lspci output ]]	+
-		+
-	====T60p====	+
-	* Runs fine with no extra parameters	+
-	* Started KDE via ati command.	+
-		+
-	====X20====	+
-	* Runs fine with no extra parameters	+
-		+
-	====X23====	+
-	* Runs fine with no extra parameters	+
-		+
-	====X31====	+
-	* Runs fine with no extra parameters	+
-	* [[HCL:Laptops:X31lspci | lspci output ]]	+
-		+
-	====X40====	+
-	* Runs fine with no extra parameters	+
-	* [[HCL:Laptops:X40lspci | lspci output ]]	+
-		+
-	====Z61m====	+
-	* Video: ATI Drivers from ATI Website	+
-	====R40====	+
-	* Runs fine with no extra parameters.	+
-		+
-	====Lenovo R60====	+
-	* Runs fine with no extra parameters.	+
-		+
-	==Maxdata==	+
-	====PRO 7000X====	+
-	* Runs fine with no extra parameters	+
-		+
-	==Medion==	+
-	====MD 95694====	+
-	Tested with BT2final 06.03.2007	+
-	* Sound : OK (Realtek ALC260) (KMix = OK)	+
-	* ACPI : OK (battery,charging) (KLaptop = OK)	+
-	* Display : OK (Intel 915GM Chipset) @ 1024x768	+
-	* PCMCIA : Needs the "irqpoll" kernel option at the boot to support cardbus cards (tested with D-Link DWL-G650 rev. C3).	+
-		+
-	E.g. "bt irqpoll"	+
-		+
-	==Olidata==	+
-	====Theom CW 1300====	+
-	* runs fine in standard configuration with live CD at 1280x800 using "xconf"	+
-		+
-	==Packard-Bell==	+
-	====Easynote w7200====	+
-	* Runs fine with no extra parameters,after installing nvidia drivers set up resolution.	+
-		+
-	==Philips freevents==	+
-	====x55====	+
-	*core 2 duo laptop.	+
-	*bt hangs up during boot with message	+
-	*error: sdhci:slot0: unknown controller version (16)	+
-	*does any one know a solution.... faxvm@hotmail.com	+
-		+
-	== SAMSUNG ==	+
-	====Q30====	+
-	*BT2final 06.03.2007 runs fine with sound and packet injection for Intel 2200BG out of the box	+
-	====X20====	+
-	*BT2final 07.03.2007 Recognizes Intel 2200BG while booting, but has error messages. WLAN card is not recognized in the booted system. Fixed problem with command: ''rmmod ipw2200''	+
-	''modprobe ipw2200 rtap_iface=1''	+
-		+
-	== Sony ==	+
-	====Vaio SZ-1 VP====	+
-	* Runs fine with no extra parameters.	+
-	* Runs on CORE2 with no extra parameters.	+
-	* Video Intel Corporation Mobile 945GM --> perfect	+
-	* Video NVidia Geforce 7400 Go --> ! screen resolution can't be changed (640x480) !	+
-		+
-	====Vaio VGN-FE21M====	+
-	* Runs fine with no extra parameters.	+
-	* Runs on CORE2 with no extra parameters.	+
-	* Video Intel Corporation Mobile 945GM --> perfect	+
-	* Video NVidia Geforce 7600 Go --> ! screen resolution can't be changed (1024x768) !	+
-		+
-	====Vaio VGN-FE11H====	+
-	* Runs fine with no extra parameters.	+
-	* Runs on CORE2 with no extra parameters.	+
-	* Video Intel Corporation Mobile 945GM --> perfect	+
-	* Video NVidia Geforce 7600 Go --> ! screen resolution can't be changed (1024x768) !	+
-		+
-	====Vaio VGN-FS980====	+
-	* Runs fine with no extra parameters.	+
-	* Video Intel Corporation Mobile 915GM --> perfect	+
-	* Need to run xconf to achieve native resolution (1280x800)	+
-		+
-	====Vaio PCG-FX340====	+
-	*Works perfectly	+
-		+
-	====Vaio VGN-S360====	+
-	* Runs fine with no extra parameters.	+
-	* Video ATI 9700 Mobility --> perfect	+
-	* Need to run xconf to achieve native resolution (1280x800)	+
-		+
-	====Vaio VGN-TX651/750P====	+
-	* Runs fine with no extra parameters.	+
-	* Mobile Intel(R) 915GM/GMS,910GML Express Chipset Family ---> perfect	+
-	* Run xconf first to get better than 1024x768 resolution	+
-		+
-	== Toshiba ==	+
-	====Equium A100====	+
-	*model A100-147	+
-	*Runs with no extra parameters.	+
-		+
-	====Equium A60====	+
-	*model EA60-157	+
-	*Does not detect pcmcia controller.	+
-		+
-	== Toshiba ==	+
-		+
-	====Portege 4010====	+
-	*works great no extra parameters	+
-	*suspend ever works :)	+
-		+
-	====Satellite A100-811====	+
-	*Core 2 Duo T5600	+
-		+
-	====Satellite A105-S4034====	+
-	*Run with "bt irqpoll" to make ipw3945 work	+
-		+
-	====Satellite A105-S4094====	+
-	*Run with "bt irqpoll" to make ipw3945 work,.	+
-	*Video runs at 1280x800, and everything else works fine.	+
-	*Modem is a winmodem, so it's junk. :(	+
-		+
-	====Satellite M105-S3041====	+
-	*Runs fine with no extra parameters.	+
-	*Video resolution is set at 1024*800, very nice!	+
-		+
-	====Satellite A85-S107====	+
-	*Runs great no extra parameters	+
-	*Video runs 1024x768, sound works ;-)	+
-	*Modem is winmodem, which sucked in windows too	+
-		+
-	====Satellite A-====	+
-	*My laptop has an ipw2200 wireless nic and it requires irqpoll option at boot time.	+
-		+
-	====Satellite Pro 460CDT====	+
-		+
-	*Runs ok when installed, very slow when live.	+
-	*I recommend using Fluxbox, as KDE is too hard on its limited hardware (P1 166 MMX !)	+
-	*USB works	+
-	*Internal Modem works!	+
-	*PCMCIA works (needs setting to 16 bit cardbus mode in bios)	+
-	*Sound is broken	+
-	*Screen size is OK once in the Desktop environment, (800x600), but is too large during boot, fixed by running liloconf, after install.	+
-	*GPS sort of works but GPS daemon takes for ever to determine the baud rate (on acount of limited hardware), could be fixed by installing an earlier version, and using the -s switch to set the baud rate.	+
-		+
-	====Satellite Pro 6100====	+
-	* [[HCL:Laptops:SatPro6100lspci | lspci output ]]	+
-		+
-	====Satellite 2805-S301====	+
-	*Runs fine with no extra parameters.	+
-	*Video resolution is set at 1024*768, instead of the hardwares default 800*600	+
-		+
-	====Satellite Pro 4600====	+
-	*model PS460E-0C91Q-PL	+
-	*Runs with no extra parameters.	+
-		+
-	===Satellite A70===	+
-	*Works perfectly (Model RW1)	+
-	*No extra parameters	+
-		+
-	===Satellite A110===	+
-	*Works perfectly (Model 352)	+
-	*No extra parameters	+
-		+
-	===Satellite L20-182===	+
-		+
-		+
-		+
-	===Tecra A7===	+
-	Problem with USB, otherwise everything else works (ethernet, builtin wireless, audio, visual, mouse).	+
-		+
-	===Tecra S1===	+
-		+
-	* All ok with default boot, res is 1024 x768.	+
-	[good fonts!]	+
-		+
-	===Tecra M2===	+
-		+
-	* All works Great!	+
-		+
-	===Tecra M5===	+
-		+
-	* Everything Works perfectly.	+
-	[good fonts!]	+

---

Revision as of 10:53, 22 June 2007

Contents 1 Laptop Compatibility List 1.1 Acer 1.1.1 Travelmate 212TXV 1.1.2 Travelmate 290 1.1.3 Travelmate 331 1.1.4 Travelmate 345 1.1.5 Travelmate 2301LC 1.1.6 Travelmate 3302WXMI 1.1.7 Travelmate 4101LMi 1.1.8 Ferrari 1000 1.1.9 Ferrari 4005 WLMi

Laptop Compatibility List

This section lists Laptops that have been tested with BackTrack. If you have tested a laptop that does not appear on this list, please add it in. If the laptop requires any tweaks, drivers or fixes,please make sure to mention it in the wiki. -muts

Acer

Travelmate 212TXV

• Runs fine with boot parameter 'irqpoll' (enter at first prompt 'bt irqpoll')
• Otherwise hangs with 'hdc: lost interrupt' (repeating)

Travelmate 290

• Runs fine with no extra parameters.
• IPW2100 can enter monitor mode, but not inject.
• lspci output
• Travelmate 290D
• IPW2200
• Packet Injection with IPW2200 is possible!

Travelmate 331

• Runs fine with boot parameter 'irqpoll' (enter at first prompt 'bt irqpoll')

Travelmate 345

• Runs fine with boot parameter 'irqpoll' (enter at first prompt 'bt irqpoll')
• Otherwise hangs with 'hdc: lost interrupt' (repeating)

Travelmate 2301LC

• Runs fine with no extra parameters.
• Make sure to use "xconf" before using the GUI or the graphics will get blurry.
• No built-in wireless card, so WiFi compatibility depends on the PCMCIA or USB device you use.

Travelmate 3302WXMI

• Runs fine with no extra parameters.
• Make sure to use "xconf" before using the GUI or 1280x800 wonn't be available.

  (Note:  Don't know how to enable bluetooth while running BackTrack)

Travelmate 4101LMi

• Runs fine with no extra parameters.

Ferrari 1000

• Hangs on bootup, loading ALSA drivers "ALSA sound/pci/hda/hda_codec.c: 204: hda_codec: invalid dep_range_vol 0:7fff"

   (Note:   Is there a way to skip the alsa drivers from loading? i don't really need sound)

Ferrari 4005 WLMi

• Boots fine into KDE/flux with no configuration needed
• Sound does not work correctly (distorting etc..)
• Detects onboard ethernet